How To Clean Hydration Bladder In 30 Minutes

Do you care deeply for drinking a fresh and clean water all the time? If you’re someone who loves to spend time in nature participating in healthy activities, then you know the importance of having a clean water with you. It becomes easy to carry a pack or reservoir of water with you, but there are many options available. One of the most convenient options is having a hydration bladder.

You can easily fill it with clean water, put it in your backpack and drink a refreshing water whenever you want. The problem is that after some time of using hydration bladder becomes a bit dirty. Your water won’t be as clean as before and there is a possibility of mold, mildew and other bacteria. It can cause serious health problems or trigger a disease. Believe us; you don’t want to experience it because you didn’t invest a few minutes to clean your water pack properly.

In this article, we will explain how to clean hydration bladder in minutes. We noticed that you lose less time by cleaning after each usage then when the bladder becomes dirty. Water is crucial for all living beings and you can’t live more than few days without it, but what’s the point if you’re drinking smudgy water?

What You Need to Clean Hydration Bladder Effortlessly

First and foremost, you need to be aware of what dirty water can do to your health. It can cause different serious diseases like diarrhea, cholera, Guinea worm disease, Typhoid and similar. It will take you only a few minutes to effectively clean your hydration bladder, so don’t be lazy and think about your health.

To clean the bladder and remove all the microbes, you don’t need much equipment. Here are the crucial items you need to have: Vinegar, Bleach, Cleaning tablets, Brush or Sturdy Stick.

Once you collect everything from the list, it’s time to start with the cleaning process. You shouldn’t use these chemicals until you can smell mildew when you open the bladder. If you don’t smell it, you can simply remove water from the bladder and rinse it using only hot water.

That will do the job just fine, but the major problem lies in the laziness of people. There are not many people around who will rinse their hydration bladder after each usage. That’s the fact!

In that case, be sure to always have the items from the list around, so when you can notice an odd smell, it means it’s time for cleaning. Also, hydration bladder is intended for water use only. Don’t put soft drinks or any other drinks with sugar as the bacteria is attracted to sugar which will give you even more pain.

How to Clean Hydration Bladder Without Use of Chemicals

If you’re skeptic of using chemicals to clean a reservoir that keeps your water fresh and clean, then there is a natural way to do it.

Be sure to have: Lemon, Vinegar, Stick or brush, Baking soda.

This method is as much effective as the chemical method, but you don’t need to use any harmful chemicals here. It’s up to you to choose the method, but no matter which method you choose, you need to be sure to clean the bladder very often.

This method is perfect for removing the chemical smell after using the first cleaning method. It’s possible that after cleaning you can notice a bleach or chlorine smell in your container. If so, mix water, lemon and baking soda, put it into a container and leave it for some time. After that, you won’t smell or taste nothing else than fresh and clean water.

Step by Step Instructions for Cleaning Hydration Bladder

In this part of the article, we will explain you the process of cleaning hydration bladder in details. It’s straightforward process and everyone can do it. Just don’t be lazy and take care of your health and water cleanness.

Step 1: Collect All the Cleaning Items

Chlorine is the key item for cleaning, Credit: womenhealthzone.com

First of all, you must be sure that you have all the cleaning items available. You can easily find it in every household market, so it shouldn’t be a problem. Also, all of these items will serve you for a long time once you buy it. Choose the method you want to use while cleaning the hydration bladder and you’re all set and ready for removing the bacteria from your water reservoir.

Step 2: Prepare Reservoir for Cleaning

Open the reservoir and remove all the parts so you could put the liquids in, credit: Salomon.com

Open reservoir and move all the removable parts away. If you can smell a mildew or see a mold, it means your water is being polluted each time you put it inside the reservoir which can lead to serious consequences. Remove all the liquid from the reservoir, rinse it for a few times and put a hot water inside. Add lemon and a bit of vinegar to the water and leave it for 15 minutes to stay. After that initial time, remove the liquid from the reservoir and you’re ready for the real work.

Step 3: Cleaning Process

Cleaning process is very easy and straightforward, credit: randomjoyphotography.com

Depending on the size of your bladder, the actual rule should be to mix one tablespoon of bleach for each half liter of water. Never mix water and bleach in the reservoir as it may leave a chemical taste after cleaning. Make sure to have a separate bottle or container for mixing the ingredients. Once you mix it, fill the reservoir with the mixture and leave it for an hour.

Another option you have is to use cleaning tablets based on chlorine. There are many different tablet brands, but it’s important that you get slow-release chlorine tablets as you want to leave the water inside the container for one hour. It’s a very cheap and convenient way to clean your hydration bladder.

Step 4: Remove All Liquids from the Container

Fill out the reservoir with the water to wash everything away then remove all the liquids, credit: sierratradingpost.com

Once you left the container with water and chemicals to stay for one hour, it’s time to remove the liquid and continue with the cleaning process. Drain everything from the container and flush it a few times with cold water. You can add a dish soap in the water to remove all the bleach that may be left on the surface. The best way to remove the bleach and remaining bacteria is by using a brush or some stick to reach the bottom of the reservoir. Once you’re done with cleaning the inside surface, flush everything for a few times with clean water.

Step 5: Dry Everything After Cleaning

Open the reservoir and leave it like that until everything is dry, credit: sierratradingpost.com

The cleaning process won’t be effective if you just leave a trace of water inside as it will mean the high moisture levels. The area that has high moisture levels is the perfect candidate for getting mold. You just cleaned the reservoir and removed all the mold, but you must be careful not to catch the bacteria all over again.

The best and easiest way to make sure everything is dry is to open the bladder and put the bag outside. That way the air will dry the inside surface making sure the mold can’t survive there. For even faster results, take a hair dryer and use it for a few minutes until you don’t see any more water inside.

Step 6: You’re Ready for Using

You’re ready to drink a fresh and clean water, credit: ukactiveoutdoors.co.uk

It’s possible that you’ll notice a slight chlorine taste when you use the reservoir, but don’t worry. If you can taste it, then you need to take one more step to remove all the chemicals. Fill the reservoir with hot water, add lemon juice and tablespoon of baking soda. Leave it for one hour inside. After one hour, you won’t taste or smell any chemical which means your hydration bladder is ready to store a fresh and clean water.

Conclusion

We know that drinking clean water is crucial for our health, but sometimes, because of our laziness, we’re hurting our body. If you’re using a hydration bladder, there is a high possibility that you don’t clean it after each usage. That would be the best way to maintain the cleanness, but it seems no one is doing that. We provide you with a guide on how to clean hydration bladder easily with the use of only a few items. Everyone can do it and you can buy each item for a low price in any household or regular market.

Have you ever tried to clean a hydration bladder? What items and method did you use? Please share your tips and advice with us.

Leave a Reply

Your email address will not be published. Required fields are marked *